Grouting – Resin Anchors
Key Features
The Two Speed Resin Anchors are manufactured from a sophisticated blend of reinforced polyester resins and inert fillers. The capsule contains two distinct resin gel times in the same convenient package where separate point anchor and tension times are required for bolting. Bolt rotation during installation ruptures and shreds the resin capsule enabling the key components to mix, starting a chemical reaction that transforms the resin into a solid anchor.
Pull out Test
Measured using slow set resin. 300mm encapsulation in 60MPa grout using 21.7mm core diameter high tensile grade bolts in 28mm diameter hole.
| Age | Average Load |
|---|---|
| 24Hrs | 210kN |
Punch Shear Test
Measured according to BS2782 (Part 3), with slow set resin.
Typical results:
Typical results:
| Age | Shear Strength |
|---|---|
| 24Hrs | > 22MPa |
Installation Information
Relevant specifications are taken at 25°C
| Speed (Abbrev.) | Speed | Spin Time* | Hold Time* |
|---|---|---|---|
| SFS | Super Fast / Slow | 11 | 10 - 60 |
| XFS | Extra Fast / Slow | 12 | 12 - 60 |
| FS | Fast / Slow | 14 | 12 - 60 |
| MS | Medium / Slow | 16 | 19 - 60 |
Shelf Life
Suggested shelf life is 4 months when stored below 25°C. Storage at lower temperatures is recommended, along with careful stock rotation based on use-by date.
Suggested shelf life is 4 months when stored below 25°C. Storage at lower temperatures is recommended, along with careful stock rotation based on use-by date.
