Grouting – Resin Anchors
Key Features
FASLOC® X2 resin capsules have been developed to enable full encapsulated mechanised resin bolting, utilising a resin capsule insertion tube. The FASLOC® X2 system incorporates two resin capsules joined and folded in half for packaging, and is available in either single speed or two speed configurations.
FASLOC® X2 resin capsules are typically installed using development Jumbos in underground headings with an excavation height of 4 – 6mm, where hand insertion is not safe or practical. Individual retainer caps are supplied in the boxes with the resin capsules, and one cap is fitted to the fast set end of each X2 capsule unit before being inserted into a resin capsule insertion tube for installation into the borehole. A resin capsule insertion tube is attached to the Jumbo drifter, and used to safely insert resin capsules undamaged to the back of each borehole. Retainer caps and insertion tubes are available to suit 26mm, 30mm and 36mm diameter resin capsules. The 26mm and 30mm retainer caps are designed for use in 33mm – 35mm diameter boreholes. 36mm retainer caps are designed for use in 45mm diameter boreholes.
The FASLOC® X2 range is available with single speed or two speed FASLOC® resin capsule configurations. Capsule combinations can be ordered by simply adding an X2 or X2Q (to include a retainer cap) to the endof a FASLOC® resin capsule code.
FASLOC® X2 resin capsules are typically installed using development Jumbos in underground headings with an excavation height of 4 – 6mm, where hand insertion is not safe or practical. Individual retainer caps are supplied in the boxes with the resin capsules, and one cap is fitted to the fast set end of each X2 capsule unit before being inserted into a resin capsule insertion tube for installation into the borehole. A resin capsule insertion tube is attached to the Jumbo drifter, and used to safely insert resin capsules undamaged to the back of each borehole. Retainer caps and insertion tubes are available to suit 26mm, 30mm and 36mm diameter resin capsules. The 26mm and 30mm retainer caps are designed for use in 33mm – 35mm diameter boreholes. 36mm retainer caps are designed for use in 45mm diameter boreholes.
The FASLOC® X2 range is available with single speed or two speed FASLOC® resin capsule configurations. Capsule combinations can be ordered by simply adding an X2 or X2Q (to include a retainer cap) to the endof a FASLOC® resin capsule code.
